Need to pay attention to in the process of using:

Two cars can not have any contact， the electronic system of the two cars have the same voltage.

If the battery is frozen， cannot be used to start the ride on the battery line.

Before connecting， two car engine， acoustics， air conditioning need to turn off.

The procedure is as follows:

(1) the start line of the red wire clamp on "red cell anode was saved.".

(2) and then the other side of the red wire clamp red cell anode in the "rescue" car.

(3) the black wire clamp on the "black car battery is saved".

(4) and then the black wire clamp in the "rescue vehicle" black negative battery.

(5) to start the "rescue vehicle" of the engine， and then start the "rescued" car engine. If it is found that the rescued the car still can not start， we must check the metal contact portion is bad.

When completed to start the engine， still need to be removed in order tostart a fire， or they may cause a short circuit.

Remove wire procedure is as follows:

(1) the "rescued car" black wire removed.

(2) the "black wire rescue vehicle" removing.

(3) and "the red wire rescue vehicle" removing.

(4) the "red wire rescued car" removing

Shipping takes 14-18 days.